NStor Technologies Disk Array Enclosure User Manual download pdf (Page 82)

Technical Information

Connectors and Jumpers

CONNECTORS AND JUMPERS

This section provides information about the connector pinouts on the

termination interface card and jumper settings on the backplane printed circuit

board for your nStor CR8e subsystem.

Connectors

Located on each termination interface card are two VDH SCSI connectors. They

provide the input/output interface from the subsystem bus to the RAID controller

or host adapter card.

CR8e (continued)

Safety Requirements UL1950

CSA C22.2 #950

TUV/EN60950

CE Compliance (EMC) 89/336/EEC EMC Directive

Shock

Operating

Non-Operating

1.0 G, 2 - 50 ms

20.0 G, 2 - 20 ms

Vibration

Operating

Non-Operating

5 - 500 Hz, 0.25 G (pk to pk)

5 - 500 Hz, 1.0 G (pk to pk)

Signal Name Pin

Number

Conductor

Number

Signal Name Pin

Number

Conductor

Number

+DB(12) 1 1 – DB(12) 35 2

+DB(13) 2 3 – DB(13) 36 4

+DB(14) 3 5 – DB(14) 37 6

134

35 68

VHD/HD 68-pin SCSI

P-Cable Connector

Pin-out

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 91 92

No comments

NStor Technologies Disk Array Enclosure User Manual Page 82