NStor Technologies Disk Array Enclosure User Manual download pdf (Page 26)

Installation

System Requirements

The nStor CR8e disk subsystem is based on an open architecture design and can

be connected to any host-based SCSI system. Refer to your adapter/controller and

host system user’s manuals for information about the system requirements for

the host system where the controller will be installed.

Guidelines

Before installation, you will need to consider the following:

■ When referencing a component on the rear panel it is assumed the user is

facing the rear panel and when referencing the front panel components the

assumption is that the user is facing the front panel.

■ Interior temperature of the rack cabinet should be maintained at ambient

temperatures but must not exceed 117°F (47°C) during normal operation.

■ Remove each piece from the shipping carton, leaving the disk drives in

their anti-static protective packaging until you are ready to install them.

■ Save the packing materials in case you need to ship the CR8e.

■ Secure all cable connectors using the thumb screws (ﬁnger tight only).

■ When connecting the data cable VHD connectors, be sure to exercise

caution that the connector is inserted carefully and correctly. Otherwise it

is very likely to bend the pins inside the connector.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 91 92

No comments

NStor Technologies Disk Array Enclosure User Manual Page 26