Technical Information
J15 (FAN) and J17 (OEM FAN)
76
J15 (FAN) and J17 (OEM FAN)
CAUTION: Jumper configuration to be performed by qualified service personnel only.
There are two separate fan connectors that are located at J15 and J17. Fan
connector J15 is used when a SAF-TE card is present in the CR8e. When the fans
are plugged into J15, the SAF-TE card controls and monitors fan speed.
Fan connector J17 is used in OEM applications when there is no SAF-TE card
installed. Fan connector J17 supplies each fan with +12 volts for full speed
operation.
OFF ON Motor spins up only on SCSI
“start” commands.
OFF OFF Motor spins up at DC power on.
Pins 1 and 2 Pins 3 and 4 Drive Spinup Mode
Comments to this Manuals